Echosounders SIMRAD

Simrad has long been a pioneer in the development of combined marine electronics that display a range of data to allow the helmsman to view all necessary navigation information on one compact screen. As this technology has progressed, Simrad has been able to provide even more detail to the helmsman in order to create safer navigation and more enjoyable boating. The echo sounders are designed to cover your requirements whether you are a commercial fisherman, sports fisherman or you are looking for a reliable echo sounder for all around navigational use.

 

Simrad CM60 ChartMapping System

The Simrad CM60 is a high-speed dedicated fishery plotter that uses the echo sounder depth data and the GPS lat/long data to generate topographic seabed maps in real time. The results are combined with the latest vectorised surface maps to form a powerful and complete three dimensional navigation system. Highly advanced mathematics is used to calculate the seabed mapping and build up dedicated bathymetric charts of the area sailed. Surface navigation uses today’s official S57 electronics charts or the CM-93 world coverage vector charts from C-Map. The new seafloor map generated by the Simrad CM60 is displayed integrated with the vectorised charts, and the combination appears as one seamless chart and thereby improves the details on the original seabed chart.

The seafloor calculations are fully automatic and do not require a specific sailing pattern. The seafloor becomes more accurate for each time an area is visited. The system is operated from a standard or a wire less roller ball. The keyboard is necessary for writing names and comments into the chart.

Fast zooming and seamless charts are also standard features in the CM60 chart plotter. In addition to the detailed chart you are navigating on, an additional movable overview chart is on the screen to give a view of a larger area.

Connected to a modern radar with ARPA target data output, all targets are presented on the chart. Track from each ARPA target can be saved for easier navigation. You also get course and speed for each target and distance to each target.

With the optional HT SW module, the raw data from the Simrad ES60 or the EQ60 echosounders are used to deduce the seabed harness. Both the depth and the hardness information are displayed on the Simrad CM60 seabed map. The Simrad ES/EQ60 echogram display can be shown in a window in the chart plotter giving a one-screen presentation of the plotter and the echo sounder. The operation of the echo sounder is simple with just a few buttons. Data for many hours can be stored. The area covered in the echo sounder window is indicated on the chart and the whole trip can be spooled forward and backwards. This creates a unique connection between the 3-D seafloor map and historical data from the echo sounder.

Specification:

Processor Unit: Intel Celeron 633/66 MHz. 128kB L2 cache
RAM 128М
Hard disk 2,5” 6GB
Slimline CD and FDD
COM2 + Parallel Port
2 USB Ports
LAN (ethernet) 10/100MB
Operating system: Linux
Operation: From remote roller ball and keyboard
Data output: Steering information to Autopilot
Data input: Position data from GPS

Depth data from echo sounder

ARPA data from radar
Hardware option: COM3 – COM4 serial port
Software options: HT: Bottom discrimination from Simrad ES60 and EQ60

Trawl Position from Simrad ITI
Supply voltage: 95 –265 VAC
LCD дисплей Simrad:
Monitor viewing size: 15, 18 or 20 inch
Resolution 15”: 1024х768
Resolution 18/20”: 1280х1024
Voltage: 95-265 VАС
Option: Color printer

 

 

Simrad EQ60 BB

Simrad EQ60 has all the features of a professional echosounder in addition to the features that the Windows 2000 operating system provides. You can operate the sounder from a regular or wireless roller ball. You can order the Simrad EQ60 echosounder with a separate processor unit and use a color monitor of your choice. You can record raw data onto the hard disk for later reply and studying. Each frequency is displayed and operated independently as if you had two different sounders.

  • Dual high power transmitters
  • Dual high performance receivers with 120dB dynamic range
  • Time Varied Gain control over the entire dynamic range
  • Three pulse lengths
  • High definition, 4 cm sampling (200 kHz)
  • Screen resolution 1024 x 768 pixels
  • Size your own display windows
  • Easy to operate with easy to understand Dialog boxes
  • Separate Gain control for Fish, School and Bottom
  • Seven different screen background colors
  • 400 pages of screen memory with lat/long, temperature, time and date
  • Recording of raw data for later processing

Specification:

Resolution: 1024 x 768
Dual frequency: 38/200 kHz or 50/200 kHz
Power output: up to 1 kW RMS per channel
Single fish/Bottom detection:
38 kHz: 600/2200 meter
50 kHz: 550/1700 meter
200 kHz: 290/550 meter
Operation: Windows operation with remote roller ball
Ranges: 5-5000 meter
Phased Control: Manual or automatic, any range in steps of 1 meter
Bottom and pelagic expansion: 1 – 20 meter in steps of 1 meter
A-scope: Screen, layer or expanded area
Internal memory: Recordings of 400 screens on HDD
Processor: Pentium, 64Mb RAM
Power: 95 – 265 VAC
Voltage: 100 W
Data output (NMEA 0183): Bottom depth to sonar, trawl system or chartplotter
Data output LAN (Ethernet): Bottom depth and discrimination for Simrad CM60 chartmapping system
Features:
  • Simrad EQ60, antenna 38/200 kHz, roller ball, data cable
  • EQ6-204195 Simrad EQ60 38/200 kHz
  • KSV-203004 antenna 38/200 Combi-D
Options:
  • Color printer
  • CD/Floppy station
  • Simrad EQ60BB (Black box)
  • Maximum three additional displays
  • Power supply unit

 

 

Simrad ES 60

High performance at any depth, easy operation and remote control are key elements in our design. A Simrad ES60 system can have a choice of up to four high power transceivers. For highest performance these are installed close to the transducer and linked to the bridge with a single data cable. The flexible installation in the wheelhouse, with a variety of display sizes, can fit any sized bridge. A variety of highly efficient ceramic transducers will suit any type of fishery in shallow or deep waters. Up to four frequencies shown on the same display. Each frequency can be operated independently. Memory of favourite settings. Unlimited range selections. Separate gain-settings for fish, schools and bottom. Dual high performance receivers with 140dB dynamic range. Recording memory. Split Beam feature with true fish size and volume. Bottom discrimination data putput to Simrad CM60 Chart Mapping system.

True fish size

  1. Fish plot.The fish plot presentation is a single fish position tracking display and indicates where the fish is in the echosounder beam.
  2. Fish SIze Histogram. A fish size analyser, depicting true fish size by echo color, and size distribution on a bargraph.
  3. Bottom Espansion. Bottom locked scale expansion/ Gives more detailed information of fish close to the bottom.
  4. Echogram. A high performance, multi-frequency deep water fish finder with a large dynamic range. Single fish detection below 1000 meter.

Multi-frequency presentation

Improved catchability with multi frequency presentation:

  1. 18 kHz split beam
  2. 38 kHz single beam
  3. 200 kHz single beam

Specification:

Display size: 14″, 18″ or 20″ color LCD
Range: 5-5000 m. Manual, auto start and auto range
Phasing: Manual or auto
Bottom expansion: 5-5000 m
A-scope: Screen, layer or expanded area
Color printer: Option
Supply voltage: 95-265 VАС
Power: 100 W
Frequencies: 38/200 kHz or 50/200 kHz
OPerating frequencies: 1 or 2
Single Beam frequencies: 18, 27, 38, 50, 70, 120 or 200 kHz
Split Beam frequencies: 18, 38, 70, 120 or 200 kHz
Power output: 18, 50 kHz, up to 2 kW/ channel

27 kHz, up to 3 kW/ channel

38 kHz, 2 or 4 kW/ channel

70, 120 kHz, up to 1 kW/ channel