Furuno FAR-21×7 series
- This series of radar comply with the latest IMO and IEC standards: IEC 60945, IEC 62388, IEC 61162, IEC 62288, IMO MSC.191(79), IMO MSC.192(79), IMO A.694(17), IMO A.813(19), IMO SN/Circ.243
- Advanced signal processing for improved detection in rough sea
- LCD display providing crisp radar images
- Designed to comply with SOLAS carriage requirements for ships below 10,000 GT
- Up to four radars can be interswitched in the network without an extra device
- Automatic plotting/tracking of 100 targets manually or automatically acquired
- Easy operation by customizable function keys, trackball/wheel palm module and rotary controls
- Low spurious magnetrons meeting ITU-R unwanted emission standards
- Displays 1000 AIS equipped targets
- Easy operation by customizable function keys, trackball/wheel palm module and rotary controls
- 100 Base-TX Ethernet Network System
The revolutionary FAR-21×7 series of X- and S-band radars are the result of FURUNO’s 50 years of experience in marine electronics and advanced computer technology. This series is designed to meet the exacting standards of the International Maritime Organization (IMO) below 10,000 GT.
The display unit employs a 20.1″ LCD which provides an effective picture diameter of larger than 250 mm. The SXGA monitor provides crisp radar images, which are presented in a selectable color with a day and night background color for easy observation in all lighting conditions. Different colors are assigned for marks, symbols and texts for user-friendly operations.
Target detection is enhanced by sophisticated signal processing techniques. Two guard zones can be set at required ranges in any sector. Other ship’s movements are assessed by advanced target tracking software and alerted by CPA/TCPA data readouts. The FAR-21×7 series can display AIS-equipped ships, when connected with an AIS transponder.
The radar antenna is available with 4, 6.5, or 8 feet radiator. For the X-band, the rotation speed is selectable from 24 rpm for standard radars or 42 rpm for HSC. The S-band radar is also available with the antenna radiator of 10 or 12 feet. The S-band radar assures target detection in adverse weather where an X-band is heavily affected by sea or rain clutter.
Equipment list:
- Display Unit MU-201CR
- Processor Unit RPU-013
- Full-keyboard Control Unit RCU-014 or Trackball Control Unit (Palm Control Unit) RCU-015 (Specify when ordering)
- Antenna Unit with cable, 15/20/30/50/100 m (Specify when ordering)
- Power Supply unit PSU-007 for FAR-2137S
- Standard Spare Parts and Installation Materials
Options:
- Performance Monitor PM-31 for FAR-2117/27 or PM-51 for FAR-2137S (Specify when ordering)
- Remote Control Unit RCU-016
- Gyro Interface GC-10 (built in Processor Unit)
- DVI-Analog RGB Conversion Kit (Buffer board built in) OP-03-180
- RGB Connector DSUB-BNC-1 (for VDR)
- Card Interface Unit CU-100
- Transformer RU-1803/5466-1/5693/6522
- Rectifier RU-3424/1746B
- Junction Box RJB-001
- Antenna Cable RW-9600
- External Alert Buzzer OP03-21
- Hand Grip FP03-09840
- Bracket FP03-09820
- Hub HUB-100
Specification:
Antenna Radiators: | |||||
Type: | Slotted waveguide array | ||||
X-Band | S-Band | ||||
Radiator Type: | XN-12AF | XN-20AF | XN-24AF | SN-30AF | SN-36AF |
Length: | 4 ft | 6.5 ft | 8 ft | 10 ft | 12 ft |
Weight: | 33 kg | 39 kg | 42 kg | 127 kg | 133 kg |
Beamwidth(H): | 1,9° | 1,23° | 0,95° | 2,3° | 1,8° |
Beamwidth(W): | 20° | 20° | 20° | 25° | 25° |
Sidelobe (within ±10°): | -24 dB | -28 dB | -28 dB | -24 dB | -24 dB |
Sidelobe (outside ±10°): | -30 dB | -32 dB | -32 dB | -30 dB | -30 dB |
Rotation:
X-Band S-Band
|
24 rpm or 42 rpm,
21 rpm (50 Hz), 26 rpm (60 Hz) or 45 rpm
|
RF Transceiver: | |
Frequency:
X-Band S-Band
|
9410 ±30 MHz
3050 ±30 MHz
|
Output power:
FAR-2817 (RTR-078) FAR-2827 (RTR-079) FAR-2837S (RTR-080)
|
12 kW
25 kW 30 kW
|
Pulselength/PRR:
Range scale 0,125; 0,25 nm Range scale 0,5 nm Range scale 0,75; 1,5 nm Range scale 3,0 nm Range scale 6,0 nm Range scale 12; 24 nm Range scale 48; 96 nm
|
0,07µs / 3000 Hz
0,07; 0,15µs / 3000 Hz 0,07; 0,15; 0,3µs / 3000, 1500 Hz 0,15; 0,3; 0,5; 0,7µs / 3000, 1500, 1000 Hz 0,3; 0,5; 0,7; 1,2µs / 1500, 1000, 600 Hz 0,5; 0,7; 1,2µs / 1000, 600 Hz 1,2µs / 600 Hz
|
Bandwidth: Short pulse Middle pulse Long pulse |
40 MHz 10 MHz 3 MHz |
Radar Display: | |
Display: | 20.1″ color LCD (SXGA 1280×1024), 400 × 320 mm |
Effective display diameter: | 308 mm |
Echo Color: | Yellow, green or white in 32 levels |
Range scales: | 0.125; 0.25; 0.5; 0.75; 1.5; 3; 6; 12; 24; 48; 96 nm |
Ring intervals: | 0.025; 0.05; 0,1; 0.25; 0.25; 0.5; 1; 2; 4; 8; 16 nm |
Minimum range: | 30 m on 0.75 nm range scale (Using a 10 m2 test target at 3.5 m high above sea and antenna at 15 m high (IEC 62388). Different conditions give a different result, maybe close to 20 m in actual installations) |
Range discrimination: | 30 m on 0.75 nm range scale (IEC 62388) |
Range ring accuracy: | ±0.2% |
Presentation modes: | Head-Up, Course-Up, North-Up, North-Up TM |
Parallel index lines: | 1, 2, 3 or 6 lines (menu selectable) |
Radar map: | 20,000 points to create coastlines, own ship safety contour, isolated underwater dangers, buoys, traffic routing systems, prohibited areas, fairways as required by IMO. |
Automatic Plotting: | |
Acquisition: | 100 targets (e.g. manually 50, automatically 50) |
Tracking: | Automatic tracking of all acquired targets in 0.1 to 32 nm |
Guard zone (Target Acquisition Area): | Two guard zone, one of them 0.5 nm depth |
Vector: | True or relative 30 s, 1, 3, 6, 12, 15, 30 min for prediction of target motion |
Past positions: | 5 or 10 past positions at intervals of 30 s,1, 2, 3, 6 min. |
Collision warning:
CPA limit: TCPA limit:
|
0.2 – 10 nm
0 – 99 min.
|
Trial maneuver: | Dynamic or static, with selected delay time |
AIS Functions (Data input from AIS is required): | |
Symbols: | Sleeping, Activated, Dangerous, Selected, Lost targets |
Number of targets: | 1,000 targets max. |
Data indication: | Basic and expanded data |
Power Supply (specify when ordering): | |
Processor Unit: | 24 VDC or 115/230 VAC, 1ø, 50/60 Hz,
7.6 A (FAR-2117: 24 rpm at 24 VDC), 8.8 A (FAR-2127: 24 rpm at 24 VDC), 440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
|
Display Unit: | 24 VDC or 115/230 VAC, 1ø, 50/60 Hz, 2.3A (24 VDC)
440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
|
Antenna Unit: | FAR-2137S: 230 VAC, 3ø, 60 Hz; 380 VAC, 3ø, 50 Hz; 440 VAC, 3ø, 60 Hz
115 VAC, 3ø, 60 Hz with optional transformer RU-5693 230 VAC, 3ø, 50 Hz with optional transformer RU-6522 440 VAC, 3ø, 50 Hz with optional transformer RU-5466-1
|
JRC JMA-5200 Series
- Constaview™ digital signal processing
- Target Enhancement Function TEF™
- High visibility 15″ TFT LCD display (XGA:1024×768)
- High sensitivity X-band scanners
- AIS ID overlay function (50 targets: Option)
- Chart overlay function (JRC/ENC/C-MAP NT+: Option)
- ATA function (30 targets: Option)
The JMA-5200 series radar utilises the latest software based digital signal processing. Together with the 3 high speed processors, this realises unique Constaview™. This function shows real time head up mode that rotates radar image simultaneously with the ships movement, but without the annoying sweep seen normally. Seamless high speed ATA and AIS target tracking is also realised this way.
Standard supply:
- Scanner unit NKE-2102-6, NKE-2252-7 or NKE-2252-9 with 10-65 m cable
- Processor unit NDC-1340 with 5 m cable
- Keyboard NCE-7699 with 5 m cable
- LCD Monitor NWZ-164
- Installation kit
Optional items:
- NSK unit (гиро/лаг интерфейс) NCT-4106
- ATA unit (30 targets) NCA-877 (built-in NDC-1340)
- AIS I/F unit NQA-4250 (built-in NDC-1340)
- Plotting function board NDB-34 (built-in NDC-1340)
- Performance monitor NJU-64
- AC Rectifier NBA-3308 (100/110/115/200/220/230VAC)
Specification:
Scanner unit: | |
Transmitting frequency:
X-Band
|
9410 ±30 MHz |
Antenna length:
NKE-2102-6 NKE-2102-7 NKE-2102-9
|
6 ft
7 ft 9 ft
|
Transmitting power:
NKE-2102-6 NKE-2102-7 / -9
|
12 kW
25 kW
|
Beam width 3db:
NKE-2102-6 NKE-2102-7 NKE-2102-9
|
Hor.1.2° / Ver.20°
Hor.1.0° / Ver.20° Hor.0.8° /Ver.20°
|
Rotation speed:
NKE-2102-6 NKE-2102-7 / -9
|
27 RPM
24 RPM
|
Duplexer: | Circular + Diode Limiter |
Frequency conversion: | Microwave IC (Mic) |
Tuning: | Automatic/Manual |
Environment: Temperature: Relative Humidity: Waterproof: |
-25 to +55°C 93%@40°C IPx6 |
Radar Monitor: | |
Monitor: | 15″ TFT LCD (XGA 1024 × 768) |
Effective diameter: | >180 mm |
Environment: Temperature: Relative Humidity: Waterproof: |
-15 to +55°C 93%@40°C IPx5 |
Processor unit: | |
Presentation mode: | RM display with True trail RM display with Relative trail TM display |
EBL: | 2(EBL1/EBL2)(Center/Independent) 000.0deg-359.9deg Numerical indication in 4 digits |
VRM: | 2(VRM1/VRM2) 0.000-96.0nm Numerical indication in 4 digits |
Trail indication: | Off/0.25/0.5/1/3/6/10/15/30/60-minutes and continuous |
Bearing indication: | North-Up/Course-Up/Head-Up |
Available chart: | JRC/ERC/C-MAP |
Environment: Temperature: Relative Humidity: Waterproof: |
-15 to +55°C 93%@40°C IPx5 |
Power supply(voltage): | 24VDC(21.6~31.2VDC) |
Power consumption: NKE-2102-6
NKE-2102-7 / -9 |
Ave.150W, Max.300W Ave.200W, Max.400W |
JRC JMA-5300Mk2 series
- Complies with SOLAS carriage requirements for vessels under 10.000 GT. and fully meets MSC 192(79) radar performance standards effective from 1 July 2008.
- 19” high visibility LCD screen
- Constaview™ digital signal processing
- TEF™ multi-level target enhancement
- High speed version available
- Brushless antenna motors for extended lifetime
JRC’s new JMA-5300Mk2 integrates the latest leading technologies with a set of new features, that allows running radar images faster and more efficiently than ever before.Select a trail length
Other ship’s movement and speed can be monitored from length and direction of their trails, primary serving for collision avoidance. The JMA-5300Mk2 integrates four different trail length modes, that will show a ship’s course instantly, a unique operational feature that allows for more flexibility.
Target Enhancement Function (TEF)TM
Developed exclusively by JRC, TEF™, allows target enhancement relative to the target size. The smaller echoes are far more enlarged than bigger echoes, giving a better on-screen separation and identification.
ConstaviewTM
The second generation and patented Constaview™ is realised through the use of three high-speed processors (in-house Tornado™ technology). All info gathered by the radar is fully processed within a few milliseconds before displayed, generating a smooth image rotation when sailing in Head-Up mode. When changing to North-Up, the new radar image is displayed without any delay caused by the scanner rotation.
Flexible black box configuration
The processor unit is the heart of the JMA-5300Mk2, and shares the same simple configuration as its predecessor, contributing to an enhanced system configuration. Optional TT (Target Tracking) function module with up to 100 targets, and or AIS interface, plotter control unit can be built in.
Wide dynamic range receiver
The new JMA-5300Mk2 series integrates a wide dynamic range receiver that, compared to conventional models, significantly improves the differentiation of noise and targets under sea clutter. The radar system overcomes different sources of unwanted signals, maintaining a constant level of overall visible clutter.
More powerful than ever
The JMA-5300Mk2 incorporates three Tornado™ processors, which are exclusively developed and designed by JRC, bringing a new level of performance and reliability to radar operation. The new Tornado™ processors, which equal the power of twelve conventional processors, and advanced system architecture make the JMA-5300Mk2 series probably the most sophisticated radar available today.
Consistent Common Reference Point (CCRP)
As set by IMO regulations, a Consistent Common Reference Point (CCRP) is a location on own ship, to which all horizontal measurements, such as target range, bearing, relative course/speed, closest point of approach, or time to closest point of approach are referenced.
Where multiple antennas are installed, different position offsets for each antenna in the radar system should be applied with respect to the CCRP. If you switch between scanners (up to 8 possible – option), the information displayed is generated allows for consistency and uniform output. This new feature is easily accessible from the menu.
Standard:
- Scanner NKE-2103-6(HS), NKE-2254-7, NKE-2254-9, NKE-2254-6HS or NKE-1130
- Display 19″ TFT NWZ-173 with power cable 5 m
- Processor NDC-1417 with power cable 5 м
- Keyboard NCE-5171 with cable 5 m (max. 25 m)
- ATA unit (30 targets) NCA-877A (built-in NDC-1417)
- 10 cm Performance monitor NJU-84 (for JMA-5332-12)
- Connection cable (processor-monitor), 5 m
- Cable CFQ-6912-30 scanner-monitor, 30 m (max. 65 m) – for 10/25kW
- Cable 2695110056 scanner-connection box, 40 m (max. 50 m) – for 30 kW
- Cable CFQ-6912-20 connection box-monitor, 20 m (max. 30 m) – for 30 kW
- Spare parts
Option:
- ARPA unit (100 targets) NCA-877WA, built-in NDC-1417 (must be fitted on ships compliant to IMO)
- AIS interface unit NQA-2103, built-in NDC-1417 (must be fitted on ships compliant to IMO)
- 3 cm Performance monitor NJU-85 (must be fitted on ships compliant to IMO)
- NSK блок (Gyro interface unit) NCT-59A (must be fitted on ships compliant to IMO)
- Plotting function board NDB-34A, built-in NDC-1417
- Interswitch box (up to 4 radars) NQE-3141-4A
- Interswitch box (up to 8 radars) NQE-3141-8A
- AC rectifier NBA-5111 (100/110/115/200/220/230VAC)
Specification:
Scanner: | |
Transmitting frequency:
X-Band S-band (JMA-5332-12)
|
9410 ±30 MHz
3050 ±20 MHz
|
Antenna length:
NKE-2103-6(HS) NKE-2254-6HS NKE-2254-7 NKE-2254-9 NKE-1130
|
6ft.
6ft. 7ft. 9ft. 12ft.
|
Transmitting power:
NKE-2103-6(HS) NKE-2254-7,-9,-6HS NKE-1130
|
10 kW
25 kW 30 kW
|
Beam width 3db:
NKE-2103-6(HS) NKE-2254-7 NKE-2254-9 NKE-2254-6HS NKE-1130
|
Hor.1.2° / Ver.20°
Hor.1.0° / Ver.20° Hor.0.8° / Ver.20° Hor.1.2° / Ver.20° Hor.1.9° / Ver.25°
|
Rotation speed:
NKE-2103-6 NKE-2103-6HS NKE-2254-6HS NKE-2254-7,-9 NKE-1130
|
27 RPM
48 RPM 48 RPM 24 RPM 24 RPM (60/50Hz)
|
Duplexer: | Circular + Diode Limiter |
Tuning: | automatic / manual |
Ambient condition: temperature: relative humidity: |
-25 to +55°C 93%@40°C |
Display (optional on JMA-5300Mk2 series BB): | |
Display: | 19″ color LCD (SXGA 1280 × 1024) |
Effective diameter: | >250 mm |
Ambient condition: temperature: relative humidity: |
-15 to +55°C 93%@40°C |
Processor: | |
Bearing indication: | north-up / course-up / head-up |
Presentation mode: | RM display with true trail RM display with relative trail TM display |
EBL: | 2 (center/independent) 000.0° – 359.9°. digital display |
VRM: | 2 (VRM1/VRM2) 0.000-100.2nm digital display |
Trail indication: | 4 stages: short, middle, long, super long |
Ambient condition: temperature: relative humidity: |
-15 to +55°C 93%@40°C |
Input:
Pulse Synchro NMEA0183
|
100/200/400/800 pilses/nm
50 – 115VAC/30*,90*,180*,360* VBW/GLL/GGA/VBW/VTG/RMA/RMB/RMC/ZDA VDM/VDO
|
Power supply (voltage): | 21.6~31.2VDC
+ 110/230VAC (required for JMA-5332-12 antenna motor scanner)
|
Power consumption (at max wind load): |
NKE-2254-7, -9, -6HS
NKE-1130
620W
700W
240W + 1600VA
JRC JMA-7100
- Complies with SOLAS carriage requirements for vessels under 10.000 GT. and fully meets MSC 192(79) radar performance standards effective from 1 July 2008.
- 19” high visibility LCD screen
- Constaview™ digital signal processing
- TEF™ multi-level target enhancement
- High speed version available
- Brushless antenna motors for extended lifetime
- Wide dynamic range receiver
Standard:
- Scanner NKE-2103-6(HS), NKE-2254-7, NKE-2254-9, NKE-2254-6HS or NKE-1130
- Display 19″ NCD-4790 (stand alone) or NCD-4790T (desktop)
- Transmitter receiver NTG-3225 (for 3-unit types JMA-7123-7XA & JMA-7123-9XA)
- Transmitter receiver NTG-3230 (for 3-unit type JMA-7133-SA)
- Installation cable (max length 65 m)
- Spare parts
Option:
- Performance monitor NJU-85 for 10kW & 25 kW models (must be fitted on ships compliant to IMO)
- Performance monitor NJU-84 for 30 kW models (must be fitted on ships compliant to IMO)
- Power control NQE-3167
- Interswitch box (up to 2 radars) NQE-3141-2A
- Interswitch box (up to 4 radars) NQE-3141-4A
- Interswitch box (up to 8 radars) NQE-3141-8A
- VDR I/F CFQ-1891
- Scanner with deicing device for 25 kW & 30 kW models
- AC/DC converter NBA-5135
Specification:
Scanner: | |
Transmitting frequency:
X-Band S-band
|
9410 ±30 MHz
3050 ±20 MHz
|
Antenna length:
NKE-2103-6(HS) NKE-2254-6HS, NKE-1125-6 NKE-1129-7 NKE-1125-9, NKE-1129-9 NKE-1130, NKE-1139
|
6ft.
6ft. 7ft. 9ft. 12ft.
|
Transmitting power:
NKE-2103-6(HS) NKE-1125-6,-9, NKE-2254-6HS, NKE-1129-7,-9 NKE-1130, NKE-1139
|
10 kW
25 kW 30 kW
|
Beam width 3db:
NKE-2103-6(HS), NKE-1125-6 NKE-1125-9, NKE-1129-9 NKE-2254-6HS NKE-1130, NKE-1139
|
Hor.1.2° / Ver.20°
Hor.0.8° / Ver.20° Hor.1.2° / Ver.20° Hor.1.9° / Ver.25°
|
Rotation speed:
NKE-2103-6 NKE-2103-6HS NKE-2254-6HS NKE-1125-6,-9 NKE-1129-7,-9, NKE-1130,-1139
|
27 RPM
48 RPM 48 RPM 24 RPM 24 RPM
|
Duplexer: | Circular + Diode Limiter |
Range scale: | 0.125 – 96 nm |
Tuning: | automatic / manual |
Modulator: | solid state modulator circuit |
Ambient condition: temperature: NTG-3225/NTG-3230: relative humidity: |
-25 to +55°C -15 to +55°C 93%@40°C |
Display: | |
LSD: | 19″ color (SXGA 1280 × 1024) |
Effective diameter: | ≥250 mm |
Ambient condition: temperature: relative humidity: |
-15 to +55°C 93%@40°C |
Bearing indication: | north-up / course-up / head-up |
Presentation mode: | RM display with true trail RM display with relative trail TM display |
EBL: | 2 (center/independent) 000.0° – 359.9°. numerical indication in 4 digits |
VRM: | 2 (VRM1/VRM2) 0.000-100.0nm numerical indication in 4 digits |
Trail indication: | 3 stages: short, middle, long |
Navigation markers: | 20.000 points |
Off center: | within 66% of radius, except 96 nm |
ARPA tracking numbers: | 100 |
AIS target numbers: | 300 (sleeping + activated), 100 (activated) |
Power supply: | AC 110V (AC 100 to 115V) and/or AC 230V (AC 220 to 240V), 50/60Hz, 1Ø |
Power consumption (at max wind load): NKE-2103-6(HS), NKE-2254-6HS
NKE-1125-6, -9, NKE-1129-7,-9 NKE-1130, NKE-1139 |
avg 350VA / max 1000VA avg 350VA / max 1700VA avg 400VA / max 2000VA |
JRC JMA-9100
- Complies with SOLAS carriage requirements for vessels above 10.000 GT. and fully meets MSC 192(79) radar performance standards effective from 1 July 2008
- 23” high visibility LCD screen
- Constaview™ digital signal processing
- TEF™ multi-level target enhancement
- High speed version available
- Wide dynamic range receiver
Standard:
- Scanners NKE-2103-6(HS), NKE-1125-6,-9, NKE-2254-6HS, NKE-1129-7,-9, NKE-1130 or NKE-1139
- Radar display unit 23.1″ TFT NCD-4990 (stand alone) или NCD-4990T (desktop, consists of NWZ-170 (display), NDC-1399-9 (processor) and NCE-5163 (keyboard)
- Separate transmitter receiver NTG-3225 (for 3-unit types JMA-9123-7XA and JMA-9123-9XA)
- Separate transmitter receiver NTG-3230 (for 3-unit type JMA-9133-SA)
- Installation cable (max length 65 m)
- Spare parts
Options:
- Performance monitor NJU-85 (for 10kW and 25 kW models)
- Performance monitor NJU-84 (for 30kW models)
- Power control NQE-3167
- Interswitch (built-in type up to 2) NQE-3141-2A
- Interswitch (built-in type up to 4) NQE-3141-4A
- Interswitch (built-in type up to 8) NQE-3141-8A
- AC/DC converter NBA-5135 (for JMA-9110-6XA(H), JMA-9122-6XAH)
- VDR I/F CFQ-1891
- ROM cartridge
- Scanner with deicing device for 25 kW & 30 kW models
Specification:
Transmitting frequency:
X-Band S-band
|
9410MHz ±30MHz
3050MHz ±20MHz
|
Antenna length:
NKE-2103-6(HS) NKE-2254-6HS/-1125-6 NKE-1129-7 NKE-1125-9/-1129-9 NKE-1130/-1139
|
6 ft. (1910 mm)
6 ft. (1910 mm) 7 ft. (2270 mm) 9 ft. (2825 mm) 12 ft. (4000 mm)
|
Transmitting power:
NKE-2103-6(HS) NKE-2254-6HS/-1125/-1129 NKE-1130/-1139
|
10 kW
25 kW 30 kW (S-Band)
|
Beam width 3db:
NKE-2103-6(HS)/-2254-6HS/-1125-6 NKE-1129-7 NKE-1125-9/-1129-9 NKE-1130/-1139
|
Hor.1.2° / Ver.20°
Hor.1.0° / Ver.20° Hor.0.8° / Ver.20° Hor.1.9° / Ver.30°
|
Rotation speed:
NKE-1130/-1139/-1125/-129 NKE-2103-6 NKE-2254-6HS/-2103-6HS
|
24 RPM
27 RPM 48 RPM
|
Motor: | brushless |
Scanner weight: NKE-2103-6(HS) NKE-1125-6(HS) NKE-1125-9 NKE-1129-7 NKE-1129-9 NKE-1130 NKE-1139 |
40 kg 50 kg 60 kg 51 kg 53 kg 180 kg 150 kg |
Radar display unit: | |
LCD: | 23.1″ color LCD (SXGA 1280 × 1024) |
Effective diameter: | ≥320 mm |
Bearing indication: | North, Course, Track |
Presentation mode: | RM display with true trail RM display with relative trail TM display |
EBL: | 2 (center/independent) 000.0° – 359.9°. 4 digits |
VRM: | 2 (VRM1/VRM2) 0.000-100.0 nm 4 digits |
Trail indication: | 3 stages: short, middle, long |
Navigation markers: | 20000 points |
Off center: | within 66% of radius, except 96 nm |
ARPA tracking numbers: | 100 |
AIS target numbers: | 300 targets (“sleeping” + active), 100 (active) |
Ambient condition (scanner): temperature: (for NTG-3225/NTG-3230) relative humidity: |
-25 to +55°C -15 to +55°C 93%@40°C |
Ambient condition (below deck units): temperature: relative humidity: |
-15 to +55°C 93%@40°C |
Power supply: | AC 100~115V and/or AC 220~240V, 50/60Гц |
Power consumption (at max wind load):
JMA-9110-6XA(H), JMA-9122-6XAH
JMA-9122-6XA,-9XA MA-9123-7XA,-9XA JMA-9132-SA,-9133-SA |
avg .350VA / max. 1000VA avg .350VA / max. 1700VA avg .350VA / max. 1700VA avg .400VA / max. 2000VA |
Selesmar Selux ST ARPA
- Designed for new Navigation Radar Standard iec 62388
- Modular and solid state construction
- Electronic Modulator based on mosfet technology
- Low Noise Amplifier providing a reduced overall Noise Figure
- Microcomputer controlled operations
- Serial link with telemetry and remote control for adjustments
- Built-in test facilities for power supply and modulator parameters
- prf jittering removing any possible ambiguity due to multiple-time-around echoes
- Two different Sectors Blanking to be set at time of installation
- Performance Monitor
- Rotation: 20 or 40 RPM
Selesmar Selux ST – the perfect tool for ships in arctic waters
- High gain and higher sensibility (12 feet X-band array)
- Possibility to capture lower reflection echoes from the ice
- Environmentally adapted outdoor equipment
- Better resolution in azimuth angle
- Better definition of echoes
- Special stc shape for optimal suppression of iced sea clutter
- Possibility to detect small objects/echoes over ice
- Capacity of displaying raw video without automatic video processing
- Easy understanding of the differences between ice reflections
- The Consilium Selesmar Selux st exceeds imo radar performance requirements
The result is that new ice pathways or rough areas in the ice banks are clearly visible because they reflect more than standard ice and water channels in the ice can easily be detected.
The Selux ST ARPA display is produced in three different confgurations
The deck configuration provides an optional display deck stand which can also house the electronic cabinet.
The modular configuration with monitor, keyboard and arpa electronic cabinet supplied as three separate modules which can be flush mounted into the bridge console to the customers preference.
The table top configuration where the monitor and key board are housed into an ergonomic console while the arpa electronics are contained in a separate bulkhead mounted cabinet.
X-band antenna group including 6, 9 or 12 feet antenna and pedestal with 12/25 kW transceiver up-mast. S-band antenna group including 12 feet antenna and pedestal with 30 kW transceiver up-mast.
Specification:
Scanner: | |
Transmitting frequency: X-Band S-band |
9410 ±30 MHz 3050 ±20 MHz |
Antenna length: Selux ST 340/250 ARPA SRT 12U/6X Selux ST 340/250 ARPA SRT 12U/9X Selux ST 340/250 ARPA SRT 12U/12X Selux ST 340/250 ARPA SRT 25U/6X Selux ST 340/250 ARPA SRT 25U/9X Selux ST 340/250 ARPA SRT 25U/12X Selux ST 340/250 ARPA SRT 25D/6X Selux ST 340/250 ARPA SRT 25D/9X Selux ST 340/250 ARPA SRT 25D/12X Selux ST 340/250 ARPA 30U/12S Selux ST 340/250 ARPA 30D/12S |
6ft. 9ft. 12ft. 6ft. 9ft. 12ft. 6ft. 9ft. 12ft. 12ft. 12ft. |
Transmitting power: Selux ST 340/250 ARPA SRT 12U/6X Selux ST 340/250 ARPA SRT 12U/9X Selux ST 340/250 ARPA SRT 12U/12X Selux ST 340/250 ARPA SRT 25U/6X Selux ST 340/250 ARPA SRT 25U/9X Selux ST 340/250 ARPA SRT 25U/12X Selux ST 340/250 ARPA SRT 25D/6X Selux ST 340/250 ARPA SRT 25D/9X Selux ST 340/250 ARPA SRT 25D/12X Selux ST 340/250 ARPA 30U/12S Selux ST 340/250 ARPA 30D/12S |
12 kW 12 kW 12 kW 25 kW 25 kW 25 kW 25 kW 25 kW 25 kW 30 kW 30 kW |
Mast config: Selux ST 340/250 ARPA SRT 12U/6X Selux ST 340/250 ARPA SRT 12U/9X Selux ST 340/250 ARPA SRT 12U/12X Selux ST 340/250 ARPA SRT 25U/6X Selux ST 340/250 ARPA SRT 25U/9X Selux ST 340/250 ARPA SRT 25U/12X Selux ST 340/250 ARPA SRT 25D/6X Selux ST 340/250 ARPA SRT 25D/9X Selux ST 340/250 ARPA SRT 25D/12X Selux ST 340/250 ARPA 30U/12S Selux ST 340/250 ARPA 30D/12S |
Up-mast Up-mast Up-mast Up-mast Up-mast Up-mast Down-mast Down-mast Up-mast Down-mast |
Rotation speed: 6X antenna 9X antenna 12X antenna 12S antenna |
20 or 40 RPM 20 or 40 RPM 20 RPM 20 RPM |
Pulse length (nsec): | 60 – 250 – 800 |
PRF (Hz): | 3000-1500-750 |
Gain (dB): 6X antenna 9X antenna 12X antenna 12S antenna |
29 31 32.5 27.5 |
Horizontal beam width at -3 dB: 6X antenna 9X antenna 12X antenna 12S antenna |
1.3° 0.9° 0.7° 2.0° |
Vertical beam width at -3 dB: 6X antenna 9X antenna 12X antenna 12S antenna |
22° 22° 22° 22° |
Weight of Antenna (Up-mast): 6X antenna 9X antenna 12X antenna 12S antenna |
40 kg 44 kg 49 kg 255 kg |
Weight of Antenna (Down-mast): 6X antenna 9X antenna 12X antenna 12S antenna |
38 kg 42 kg 47 kg 220 kg |
Ambient condition: Option |
-25 to +55°C Down to -40°C (Pedestal with heater) |
Display: | |
Monitor: | 19″ LCD TFT 23″ LCD TFT |
Effective diameter: | >250 mm (12″ PPI) >320 mm (16″ PPI) |
Resolution: | 1280×1024 1600×1200 |
Presentation Modes: | Day/Night modes |
Ambient condition: | -15 to +55°C (IEC 60945 protected equipment) |
IP class: | IP41 |
Processor: | |
True Motion (TM): | Course and North Up |
Relative motion (RM): | Head, Course and North Up |
Off-centering: | Up to 50% of range scales in use |
Range Scales: | 0.25; 0.5; 0.75; 1.5; 3; 6; 12; 24; 48; 96 nm |
Range Resolution: | 3 m on 0.75 nm range scale |
Azimuth resolution: | 0.1° |
Trackball: | Polar and Geographical coordinates continuously displayed |
Diagnostic: | On-line diagnostic programs |
Ambient condition: | -15 to +55°C |
ARPA facilities | |
Acquisition: | Manual or automatic up to 40 targets |
Tracking: | Automatic up to 40 targets |
Autoacquisition: | Autoacquisition zones stabilised on own-ship heading and North |
Guard Zones: | Size/shape configurable. Four sectors with fixed width of 0.5 nm configurable as auto acquisition of guard zone. |
AIS facilities | |
Presentation: | Up to 200 targets chosen as the nearest to own ship |
Safe checking: | All 200 targets in sleep or activated stated |
Autoacquisition/ Guard Zones: | Same zones as described for ARPA facilities |
Trial Manoeuvres | |
Trial course: | For ARPA and AIS target. Manually adjustable from 0° to 360° or automatically computed within 135° with reference to present course |
Trial speed: | Adjustable from 0 to 50 knots |
Trial ROT: | Adjustable from 1° to 60°/min |
Mapping Operator compiled maps up to 120 segments plus symbols and text strings with selectable colours and line styles |
|
Map stabilisation: | Relative, true (Dead Reckoning) or geographic |
Map storage: | By name, on a built-in non-volatile memory |
Map adjustment: | Position and Orientation |
Parallel index: | Four independent parallel index lines |
Data readout: | Own ship data ARPA target data AIS target data |
System setting: | Safe minimum CPA and TCPA, vector / past position / trial / trials time |
Alarms | Acoustic and visual warning for: Dangerous Target, Target in Guard Zone, Lost Target, System Failure and external interface sensors (EPFS and AIS). |
Other features: | Anchor watch, echo reference speed (not for AIS enabled systems), EPFS speed. |
Input: | Serial interface NMEA0183 (IEC 61162-1/2) Gyro, Speed log, EPFS, AIS, Wind sensor, Ext. Alarm Interface |
Output: | Serial interface NMEA 0183 (IEC 61162-1/2) RATTM-RAOSD-RARSD-RAALR sentence AIACK for AIS alarm acknowledge, RATTD, RATLB, Dead Man Alarm, Power Fail, Danger Target, Video output for VDR |
Other interface: | Ethernet 10/100Mbit/s USB 2.0 port |
Power supply: Display Unit SRT X-Band Radar S-Band Radar |
220/115 VAC 50/60 Hz (30 W) 220/115 VAC 50/60 Hz (300 VA) 220 VAC, 380 VAC 50 Hz or 255 VAC, 440 VAC 60 Hz |
Storage Temperatures: | -25°C to 70°C (IEC 60945) |
Relative humidity: | Up to 93% at 40°C (IEC 60945) |
Vibrations: | As per IEC 60945 |